The Spinnybois 2006 motor is listed in a 2150KV 6S variant and is used in the XI35 Pro O4 Pro 6S configuration. That gives an XI35 owner a concrete reference for a replacement. For another aircraft, treat the documented application as a starting point and check mechanical and electrical suitability independently.
In this guide: specifications · The aircraft specification gives the useful context · Check the physical replacement carefully · Evaluate the complete filming rig · FAQ
OddityRC Spinnybois-2006 2150KV Motor at a glance
| Item | Listed detail |
|---|---|
| Product | Spinnybois 2006 |
| Listed variant | 2150KV 6S |
| Referenced aircraft | XI35 Pro O4 Pro 6S |
| XI35 propeller | HQ DT90-3 |
| XI35 FC / ESC | OddityRC F7 40A AIO |
| XI35 recommended battery | 6S 1100–1300mAh |
The aircraft specification gives the useful context
The XI35 O4 Pro product page identifies the 2006 2150KV motor alongside DT90-3 propellers and its F7 40A AIO. This combination is more useful for an owner than comparing motor names in isolation: it ties the replacement to an actual listed aircraft setup.
Before ordering, check whether your XI35 still matches that configuration. An older generation, a changed controller or a modified propeller arrangement may need different information. Record the exact hardware rather than assuming that all versions of a product family use the same components.
Check the physical replacement carefully
Inspect the motor mount and adjacent structure after an impact. Confirm the shaft and propeller attachment, fastener dimensions and wire routing for the supplied motor. A damaged mount or a rubbing propeller will not be corrected simply by fitting a fresh motor.
The current motor page’s text does not give a full dimension drawing, thrust table or continuous-current test conditions. If a custom aircraft depends on those values, request them for the exact motor before making the selection. The “2006” size designation and KV label do not supply the missing load measurements.
Evaluate the complete filming rig
A camera and mount can change the aircraft’s mass and balance. Establish a baseline with the battery and recording equipment you actually intend to use, then assess a repeatable route. Keep propellers, battery condition and camera load consistent when comparing the behaviour before and after a repair.
The XI35 listing gives 312.6g without a battery, not its takeoff weight. Add the actual pack, camera and accessories when planning the rig. Neither that dry figure nor the motor selection establishes a payload or endurance result for every shooting configuration.
Before you choose
- Match the motor to the actual XI35 generation or custom build.
- Inspect mounting, propeller fit and wires before reassembly.
- Use the same battery and camera load when evaluating a repair.
Frequently asked questions
What is the current motor variant?
The product listing offers 2150KV 6S. Check the selected item and supplied markings when ordering a replacement.
Is it a confirmed fit for every 3.5-inch frame?
No. The XI35 is a documented application, but another frame requires its own mechanical and electrical fit checks.
Can I calculate a payload rating from the 2006 designation?
No. Payload suitability depends on the complete aircraft and requires appropriate load and flight evaluation.
Explore the configuration
View OddityRC Spinnybois-2006 2150KV Motor options and current specifications. Select the exact variant, then check the remaining parts of your build against its requirements.
Sources and related reading
Product details checked on 30 October 2026: OddityRC product listing. XI35 Pro O4 Pro configuration. Read the related product guide, or browse Last update for the full article archive.
